Bitumen Emulsion K1-40


    Ask for product prices

    Iran Cationc Bitumen Emulsion K1-40 Manufacturer

    General Description of Cationic Bitumen Emulsion K1-40

    Iran Cationc Bitumen Emulsion K1-40 Manufacturer tack coat (rapid setting) Road emulsion is emulsified asphalt that contains at least 40% bitumen and 60% water. The principal use for this low viscosity emulsion is tack coating. Made in accordance with British Standard BS 434 Part 1: 1984 Class K1-40, cationic bitumen emulsion is designated as K1-40.

    Asphalt Emulsion K1-40 are liquid bitumen emulsions that are cold poured and are used to build and repair roads, highways, driveways, and pavements. This product is identified in conformity with these requirements by the prefix “K,” which denotes a cationic emulsion. The number to the right of the hyphen denotes the bitumen concentration, and the “1” designates an emulsion with quick breakdown. K1-40 thus stands for a cationic emulsion with a quick break and a normal bitumen concentration of 40%.

    Applications for Iran Cationc Bitumen Emulsion K1-40 Manufacturer

    In road construction, bitumen emulsion K1-40 is generally used as a tack coat to provide a link between the current surface and overlays such hot rolled asphalt, macadam, and slurry sealants.

    In this case, it serves two purposes:

    1. Reducing the chance of spilling between the two meals.
    2. Make sure there is less pushing and sliding during the application of the new overlay, which will increase compaction.

    Mist spraying and concrete curing processes both employ Iran Cationc Bitumen Emulsion K1-40 Manufacturer.

    K1-60 is typically used for surface treatment, patching, retreading, and other related applications due to its greater bitumen concentration.

    Seals and treatments:

    tack coat

    the solitary layer of therapy

    different surface treatments

    sand seal

    Fog sealing and tacking Adhesive coating Surface Dressing and Semi-Gravitation (Penetration Macadam) Slurry sealing and prime coating.

    Aggregates don’t have to be entirely dry to be utilized with cationic emulsions at room temperature. Iran Cationc Bitumen Emulsion K1-40 Manufacturer can be used in a larger variety of circumstances and pose less risk while being used.

    Conditions for Applying K1_40 Cationic Emulsion Bitumen

    At room temperature, 0.25 to 0.70 liters of Tack Coat K1-40 cationic bitumen emulsion can be sprayed per square meter (0.05 to 0.15 gallons per square yard).

    Only dry, frost-free circumstances that will last throughout the drying process of the film are suitable for applying this grade. 5 to 35 degrees Celsius should be the norm.

    Drums should be well rolled before use to stir the contents. Applying  Iran Cationc Bitumen Emulsion K1-40 Manufacturer calls for using a squeegee or hand broom. Avoid often cleaning and just spread in one direction. Spray application is more practical since it offers a consistent dispersion and even film. The BS3136: Specification for Cold Emulsion Spraying Machines for Roads should be followed while choosing spray equipment.

    Spray uniformly to prevent ponding in hollows, which might lead to a localized “fattening up” of the following courses.


    All surfaces must be dry and clear of debris, dirt, leaves, spilled gasoline, oil, and grease.

    In order to prevent the emulsion from drying out while it cures and to ensure that the surface is adequately moistened, it may be wise to dampen the surface with water when the weather is hot. Before and during the application, the surface must be dry and clear of any standing water.

    Cationic Emulsion Bitumen K140 packaging

    You may get  Iran Cationc Bitumen Emulsion K1-40 Manufacturer  in:

    IBC tanks in bulk, flex tanks

    200 liter reconditioned steel drums.

    200 lit. New steel drums.


    There are no reviews yet.

    Be the first to review “Bitumen Emulsion K1-40”

    Your email address will not be published.

    Scroll to Top